Smart Energy Source > Case Studies > Alternative Energy > Wind > AE 2.0

♦ Wind > AE 2.0 - Residential Hybrid 5 kW

SES Wind Projects

Install latest flash player if you can't see this gallery.

Project Videos

Close Move

This Content Requires Adobe Flash Player | Download Now

Close Move

Statement of Methodology

Application	Method
Energy Audit	A whole house energy audit was provided to align the sizing of the unit with the home energy demands. Recommendations were made where deficiencies were found. A whole house energy audit was provided to align the sizing of the unit with the home energy demands. Recommendations were made where deficiencies were found.
Selection of Site and Application	SES worked closely with the homeowner and vendor in both the site selection and application. SES worked closely with the homeowner and vendor in both the site selection and application.
Wind and Solar Installation	A 3.0 kW wind turbine and 2.0 kW of solar panels were selected.
Inverter	The inverter was installed to meet IEEE standards and integrated with sub-metering installed by the utility to gather data.
Net Metering	Meters power at the connection point to the utility grid, subtracting energy produced from energy consumed. Meters power at the connection point to the utility grid, subtracting energy produced from energy consumed.
Battery Backup	Stores energy for use during outages and/or non-production times. Stores energy for use during outages and/or non-production times.
MySource Integration	MySource is an open architecture system developed to allow integration with all data gathered at the end user level. This data is accessible and displayed to the end user and the utility for purposes that are useful to the specific user and organization. MySource is an open architecture system developed to allow integration with all data gathered at the end user level. This data is accessible and displayed to the end user and the utility for purposes that are useful to the specific user and organization.

Case Study Data

Critical Challenges

Home Energy Consumption Comparison

Return on Investment Analysis

Close Move

Production Output

Each solar array is designed to produce a specified amount of energy. Smart Energy Source will analyze how much the generator is actually producing in order to determine the actual efficiency of the generator in a specific location.

This data is on the SES gateway on MySource and is available to SES Partners. To become an SES parner, click here.

Close Move

Home Energy Consumption Comparison

It has been noted that with the installation of any renewable generator, consumers change behaviors in an effort to maximize their return on investment. This case study will compare energy use before and after the generator installation in order to further analyze this theory.

This data is on the SES gateway on MySource and is available to SES Partners. To become an SES parner, click here.

Close Move

Return on Investment Analysis

Using actual production output, home energy consumption comparisons, and the installation and maintenance costs of the solar array, Smart Energy Source will conduct feasibility studies of the installation. The most commonly asked questions about DG installation are how long will it take for the system to pay off, and is it more economically feasible to implement energy efficiency measures or install a DG system?

This data is on the SES gateway on MySource and is available to SES Partners. To become an SES parner, click here.

12 Next

AE 2.0 Hybrid 5 kW

Amy Wilson has always believed that going green is the way to be and by producing green energy she is taking the steps necessary to be more green. The system she has is made up of a 3kW wind turbine, installed in the fall of 2009, and a 2kW solar array that will be completed in May 2010. The total system will be able to produce over 40kWh per day during the windy day, and 15-20 kWh during non-windy times. Amy hopes that by setting an example for others she can prove that alternative energy is a sound investment financially and for the environment.

Smart Grid>Residential Solar

AE 2.0 - Residential Hybrid 5 kW | AE 3.0 - Residential Wind 5 kW | AE 4.0 - Residential Wind 7.5 kW

[ Privacy Statement ] [ Terms of Use ]